puriFlash^® 5.030

• Control unit
• Pump
• UV detector
• Fraction collector
• Solvent tray with drainage system
• Integrated column holder
• Integrated Dry-Load holder (included in the Pack 4-ways electrical valve + kit for PF-5.030)

• Flow rate range: 1 mL/min to 300 mL/min
• Max. operational flow rate: 300 mL/min
• Optimum flow rate for columns up to F0800 format
• Flow rate accuracy: +/- 2 % over 20 to 200 mL/min & 5 to 24 bar
• Flow rate repeatability: < 0.25
• Flow rate linearity: 0.98 < linearity < 1
• Pressure range: 0 to 30 bar
• Max. operational pressure: 30 bar
• Quaternary gradient valve
• Gradient tolerance step: < 3.5 %
• Air purge

• Injection mode: liquid or solid
• ”Load & Go” technology: staggered Dry-Load for even more efficient injections automated via a 4-ports electric valve (included in the Pack 4-ways electrical valve + kit for PF-5.030)
• RFID technology: automatic detection of the Dry-Load (included in the Pack 4-ways electrical valve + kit for PF-5.030)

• UV detector 200-400 nm
• UV detector 200-800 nm (included in the Pack-UVextended)
• ”DAD” technology
• Multi-wavelength and scan collection over a band of 200 nm (or 600 nm with the Pack-UVextended)
• Spectral visualization and confirmation of purity
• Flow cell pathway: 0.1 mm / 40 µL
• Integrated ELSD detector (included in the Pack-iELSD)

• Normal phase (NP)
  Particle sizes: 10 µm, 15 µm, 25 μm, 30 μm, 40 μm , 50 μm
• Reverse phase (RP)
  Particle sizes: 15 µm, 30 μm , 50 μm
• .
• Format: all Flash columns up to F0800 (with optional Integrated column holder for F0800 column) are compatible and can be used at the optimum  flow rate ; in addition , larger columns  can be used with an external column support and below the optimum flow rate
  Dry-Load up to F0330 format are compatible (included in the Pack 4-ways electrical valve + kit for PF-5.030)
  Only 20 mm and 30 mm ID preparative columns are compatible
  Integrated column holder
• .
• Integrated Dry-Load holder (included in the Pack 4-ways electrical valve + kit for PF-5.030)
• .
• RFID technology: automatic detection of the columns

• Capacity:
  ● 3 racks
  ● 132 test tubes (18 x 150 mm)
• .
• Technology:
  ● Automatic cleaning of the fraction collector needle (to avoid cross-contamination with the previous purification)
• ● RFID: automatic detection of the racks installed in the fraction collector

• Delivery includes a choice of 3 racks from the following list:
• ● Rack for test tubes :
  13 x 73 mm | 13 x 100 mm | 16 x 150 mm
  18 x 150 mm | 18 x 180 mm | 21 x 150 mm
  25 x 150 mm | 28 x 150 mm | 29,5 x 200 mm
• ● Rack for 250 mL Schott bottles
• .
• Available additional accessory:
• ● Rack for funnels (in option)
  
• ● Bottle tray (in option)
• .
• Position of the numbered tubes (to facilitate identification of tubes)

• Control via InterSoft^® X software included:
• ● Genius, Artificial Intelligence
  ● ”Flash & Go”™ technology: compatible with our smartphone app ”TLC to Flash & Prep”
  ● ”Boost & Go”™ technology
• Windows 10
• Remote control
• Touchscreen 15″
• 8 USB ports
• 2 RJ45 ports
• Bluetooth/Wi-Fi key

• Tubing after pump: 1.6 mm internal diameter
• Flow cell pathway: 0.1 mm / 40 µL

• System light status
• Solvent tray with drainage system
• Level sensor for solvents and waste
• Retention tray with leak detectors in the pump,  UV detector, fraction collector, iELSD (included in the Pack-iELSD) & valve, Dry-Load holder (included in the Pack 4-ways electrical valve + kit for PF-5.030) 
• ”Fume Enclosure” technology (allows the use of the purification system without a hood)

• ETFE
• PTFE
• 316 L Stainless steel
• Hastelloy
• PEEK
• Kalrez
• Sapphire
• Ruby
• Kel-F
• Zirconium
• PPS
• Nitronic 60
• Borosilicate glass

Tubing with fitting & ferrules:

• ● Tygon tubing for solvent tray drainage
  ● Level sensor tubing (x5)
  ● Suction tubes (x4)
• ● ETFE tubing 1/8″ pump to column C1 inlet
• ● ETFE tubing 1/8″ fraction collector outlet to waste
• ●  ETFE tubing 1/8″ draining for fraction collector

• Accessories Pack 4-ways electrical valve + kit for PF-5.030:
• ● ETFE tubing 1/8″ injection valve port 1 to Dry-Load outlet (included in the Pack 4-ways electrical valve + kit for PF-5.030)
  ● ETFE tubing 1/8″ injection valve port 4 to Dry-Load inlet (included in the Pack 4-ways electrical valve + kit for PF-5.030)
  ● ETFE tubing 1/8″ injection valve port 2 to column C1 inlet (included in the Pack 4-ways electrical valve + kit for PF-5.030)
  ● ETFE tubing 1/8″ column C1 Outlet to detector (within pack -iELSD)

• Accessories ELSD (included in the Pack-iELSD)
• ● Reduction gear tubing 6 mm to tubing 4 mm
  ● White NYLON pneumatic tube length 3 m
  ● In-line filter 20 microns
  ● ETFE tubing from in-line filter to detector
  ● ETFE tubing from column C1 outlet to the filter online
• .
• Cables:
• ● RFID cable (inclued if ordered from pack 4 ways electrical valve + kit for PF-5.030)
  ● USB/USB cable – unit control to fraction collector
  ● Power cord – screen to fraction collector
  ● HDMI cable – screen to unit control
  ● USB/MINI USB cable – screen to unit control
  ● LED’S cable – unit control to fraction collector
  ● Communication cable Sub-D9 male/female (1 m) – unit control to fraction collector
  ● Communication cable Sub-D9 male/female (0.5 m) – unit control to pump
  ● Communication cable Sub-D9 female/female (1 m) – unit control to UV detector
  ● Communication cable Sub-D9 female/female (1 m) – unit control to iELSD (included in the Pack-iELSD)
  ● Power cord – pump to fraction collector + unit control to fraction collector (x2)
  ● General power cable (model according to the country of destination)
• .
• Solvent tray
• Clips P (x2)
• Screw CHC M4x12 (x2)
• Screw CHC M4x16 (x2)
• Grower M4 (x4)
• Stylus with its clip
• UV cell test
• Rear fastening (x2)
• Screws BHC M4x10 (x2)
• Grower M4 (x2)
• UV trapdoor
• ELSD trapdoor
• Racks (x3)
• Compliance report

• Communication cable Sub-D9 male/female (1 m) – unit control to fraction collector
• Communication cable Sub-D9 male/female (0.5 m) – unit control to pump
• Communication cable Sub-D9 female/female (1 m) – unit control to UV detector
• Communication cable Sub-D9 female/female (1 m) – unit control to iELSD (included in the Pack-iELSD)

• 110 V or 220 V

• CE, TUV, ROHS

• Weight : 49 kg