Process Flash purification: puriFlash® 5.015-XL
Process Flash purification: puriFlash® 5.015-XL
Non-contractual picture.
System delivered without pump door.
puriFlash® 5.015-XL
Optimized for your purifications on a grand scale
Flow rate
825 mL/min
Max. pressure
15 bar
Components
- Control unit
- Pump
- UV detector
- Fraction collector
- Solvent tray with drainage system
- Integrated column holder (included in the Pack-Process)
- Integrated Dry-Load holder (included in the Pack-Process)
Pump
- Flow rate range: 10 mL/min to 825 mL/min
- Max. operational flow rate: 825 mL/min
- Optimum flow rate for columns up to F3000 format
- Flow rate accuracy: +/- 2 % over 100 to 750 mL/min & 5 to 12 bar
- Flow rate repeatability: < 0.25
- Flow rate linearity: 0.98 < linearity < 1
- Pressure range: 0 to 15 bar
- Max. operational pressure: 15 bar
- Quaternary gradient valve
- Gradient tolerance step: < 3.5 %
- Washing disks
Injection
- Injection mode: liquid or solid
- RFID technology: automatic detection of the Dry-Load (included in the Pack-Process)
Detection
- UV detector 200-400 nm
- UV detector 200-800 nm (included in the Pack-UVextended)
- ”DAD” technology
- Multi-wavelength and scan collection over a band of 200 nm (or 600 nm with the Pack-UVextended)
- Spectral visualization and confirmation of purity
- Flow cell pathway: 0.3 mm / 80 µL
Column & support compatibility
- Normal phase(NP)
Particle sizes: 15 µm, 25 μm, 30 μm, 40 μm , 50 μm - Reverse phase (RP)
Particle sizes: 30 µm, 50 µm - .
- Format: all Flash columns up to F1600 format & Dry-Load up to F0330 format are compatible
- .
- Integrated column holder (included in the Pack-Process)
- Integrated Dry-Load holder (included in the Pack-Process)
- .
- RFID technology: automatic detection of the columns (included in the Pack-Process)
Fraction collector
- Capacity:
● 3 racks
● 42 test tubes (29,5 x 200 mm) - .
- Technology:
● Automatic cleaning of the fraction collector needle (to avoid cross-contamination with the previous purification)
● RFID: automatic detection of the racks installed in the fraction collector
Proposed racks
- Delivery includes a choice of 3 racks from the following list:
- ● Rack for test tubes:
16 x 150 mm | 18 x 150 mm | 18 x 180 mm |
21 x 150 mm | 25 x 150 mm | 28 x 150 mm |
29,5 x 200 mm - ● Rack for 250 mL Schott bottles
- .
- Available additional accessory:
- ● Rack for funnels (in option)
- .
- Position of the numbered tubes (to facilitate identification of tubes)
Software & control unit
- Control via InterSoft® X software included:
- ● Genius, Artificial Intelligence
- ● ”Flash & Go”™ technology: compatible with our smartphone app ”TLC to Flash & Prep”
- ● “Boost & Go”™ technology
- Windows 10
- Remote control
- Touchscreen 15″
- 8 USB ports
- 2 RJ45 ports
- Bluetooth/Wi-Fi key
System optimization
- Tubing after pump: 2.4 mm internal diameter
- Flow cell pathway: 0.3 mm / 80 µL
Safety
- System light status
- Solvent tray with drainage system
- Level sensor for solvents and waste
- Retention tray for Dry-Load holder (included in the Pack-Process)
- Retention tray with leak detectors in the pump, UV detector & fraction collector
- ”Fume Enclosure” technology (allows the use of the purification system without a hood)
Materials in contact with solvents
- ETFE
- PTFE
- 316 L Stainless steel
- Hastelloy
- PEEK
- Kalrez
- Sapphire
- Ruby
- Kel-F
- Zirconium
- PPS
- Nitronic 60
- Borosilicate glass
Accessories box
- Tubing with fitting & ferrules:
- ● Tygon tubing for solvent tray drainage
- ● Level sensor tubing (x5)
- ● Suction tubes (x4)
- ● ETFE tubing 1/8″ mixing chamber to column C1 inlet (not included in the Pack-Process)
- ● ETFE tubing 1/8″ mixing chamber outlet to Dry-Load inlet (only in the Pack-Process)
- ● ETFE tubing 1/8″ Dry-Load outlet to column inlet (only in the Pack-Process)
- ● ETFE tubing 1/8″ fraction collector outlet to waste
- ● ETFE tubing 1/8″ draining for fraction collector
- .
- Cables:
- ● RFID cable (only in the Pack-Process)
- ● USB/USB cable- unit control to fraction collector
- ● Power cord – screen to fraction collector
- ● HDMI cable – screen to unit control
- ● USB/MINI USB cable – screen to unit control
- ● LED’S cable – unit control to fraction collector
- ● Communication cable Sub-D9 male/female (1 m) – unit control to fraction collector
- ● Communication cable Sub-D9 male/female (0.5 m) – unit control to pump
- ● Communication cable Sub-D9 female/female (1 m) – unit control to UV detector
- ● Power cord – pump to fraction collector + unit control to fraction collector (x2)
- ● General power cable (model according to the country of destination)
- Support for C1 column base (only in the Pack-Process)
- Solvent tray
- Clips P
- Screw CHC M4x8
- Grower M4 (x3)
- Stylus with its clip
- UV cell test
- Rear fastening (x2)
- Screws BHC 4×10 (x2)
- UV trapdoor
- ELSD trapdoor
- Racks (x3)
- Compliance report
Communication
- Communication cable Sub-D9 male/female (1 m) – unit control to fraction collector
- Communication cable Sub-D9 male/female (0.5 m) – unit control to pump
- Communication cable Sub-D9 female/female (1 m) – unit control to UV detector
Power supply
-
110 V or 220 V
Dimensions & Weight
- Weight : 49 kg