puriFlash^® 5.400-UV

• Control unit
• Pump
• UV detector
• Fraction collector

• Solvent tray with drainage system

• 2 integrated column holders

• Flow rate range: 1mL/min to 125mL/min

• Max. operational flow rate: 125mL/min

• Optimum flow rate for columns up to 60mm ID

• Flow rate accuracy: +/- 2.5 % from 3.5mL/min to 100mL/min & 5 to 320 bar

• Flow rate repeatability: < 0.25

• Flow rate linearity: 0.98 < linearity < 1

• Pressure range: 0 to 400 bar

• Max. operational pressure: 400 bar

• Quaternary gradient valve

• Gradient tolerance step: < 3.5 %

• Washing discs

• Washing pump allows circulation of water to prevent crystalline deposits on the pump piston (included in Pack-PWD)

• Injection mode: liquid

• “Load & Go” technology: with automatic 10-way valve that allows the use of loops for even more efficient injection

• Stainless steel injection loops 2mL and 20µL

• UV detector 200-400nm

• UV detector 200-800nm (included in the Pack-UVextended)

• “DAD” technology

• Multi-wavelength and scan collection over a band of 200nm (or 600nm with the Pack-UVextended)

• Spectral visualization and confirmation of purity

• Flow cell pathway: 1.0mm / 15µL

• Normal phase (NP)
  Particle sizes: 3µm, 5µm, 10µm, 15µm, 25µm, 30µm, 50µm

  Reverse phase (RP)

• Particle sizes: 3µm, 5µm, 10µm, 15µm, 25µm, 30µm, 50µm

  Format: all preparative columns up to 60mm ID are compatible
  2 integrated column holders (holder n°1: col. ≥ 20mm ID – holder n°2: col. 7.8 – 10mm ID)

• Capacity:
  • • 3 racks
  • • 132 test tubes (18 x 150mm)

  Technology:

  • • Automatic cleaning of the fraction collector needle (to avoid cross-contamination with the previous purification)
  • • RFID: automatic detection of the racks installed in the fraction collector

• Delivery includes a choice of 3 racks from the following list:
• • Rack for test tubes:
  – 13 x 73mm | 13 x 100mm | 16 x 150mm
  – 18 x 150mm | 18 x 180mm | 21 x 150mm
  – 25 x 150mm | 28 x 150mm | 29.5 x 200mm
• • Rack for 250mL Schott bottles
• • Rack for funnels (in option)
• .

Position of the numbered tubes (to facilitate identification of the tubes)

• Control via InterSoft^® X software included:
  • • Genius, Artificial Intelligence
  • • “Boost & Go”™ technology

   

• Windows 10
  Remote control
  Touchscreen 15″
  8 USB ports
  2 RJ45 ports
  Bluetooth/Wi-Fi key

• Tubing after pump: 0.5 & 0.75mm internal diameter
  Flow cell pathway: 1.0mm / 15µL

• System light status
  Solvent tray with drainage system
• Level sensor for solvents and waste
  Retention tray with leak detectors
•     • pump
•     • column holder
•     • UV detector
•     • valve
•     • fraction collector

“Fume Enclosure” technology (allows the use of the purification system without a hood)

• ETFE
  PTFE
  316 L Stainless steel
  Hastelloy
  PEEK
  Kalrez
  Sapphire
  Ruby
  Kel-F
  Zirconium
  PPS
  Nitronic 60
  Borosilicate glass

• Tubing with fitting & ferrules:
  • • Tygon tubing for solvent tray drainage
  • • Level sensor tubing (x5)
  • • Suction tubes (x4)
  • • ETFE tubing collector to Waste
  • • SS tubing injection valve port 3 to C2 inlet
  • • SS tubing injection valve port 6 to waste
  • • SS tubing injection valve port 9 to C1 inlet
  • • PEEK tubing repartition valve port 3 to C2 outlet
  • • PEEK tubing repartition valve port 4 to UV cell inlet
  • • PEEK tubing repartition valve port 5 to C1 outlet
  • • PEEK tubing BPR outlet to collector inlet
  • • PEEK tubing UV cell outlet to BPR inlet
  • • SS port for injection (injection valve port 1)
  • • Loop 2mL
  • • Loop 20µL
  • • External UV cell 1mm PEEK
  • • BPR 100PSI
  • • Column holder clip 12mm
  • • UV cell support
  • • Union 1/16”

   

  PWD accessories:

  • • PWD Tubing Kit

   

  Cables :

  • • RFID cable (x4)
  • • USB/USB cable – unit control to fraction collector
  • • Power cord – screen to fraction collector
  • • HDMI cable – screen to unit control
  • • USB/MINI USB cable – screen to unit control
  • • LED’S cable – unit control to fraction collector
  • • Communication cable Sub-D9 male/female (1m) – unit control to fraction collector
  • • Communication cable Sub-D9 male/female (0.5m) – unit control to pump
  • • Communication cable Sub-D9 female/female (1m) – unit control to UV detector
  • • Power cord – pump to fraction collector + unit control to fraction collector (x2)
  • • General power cable (model according to the country of destination)

   

  Solvent tray
  Clips P
  Screw CHC M4x8
  Grower M4 (x3)
  Stylus with its clip
  UV cell test
  Rear fastening (x2)
  Screws BHC 4×10 (x2)
  UV trapdoor

• iELSD trapdoor
  Racks (x3)
  Compliance report

Communication cable Sub-D9 male/female (1m) – unit control to fraction collector
Communication cable Sub-D9 male/female (0.5m) – unit control to pump
Communication cable Sub-D9 female/female (1m) – unit control to UV detector

110V or 220V

Weight: 50kg