Configure your puriFlash^® 5.400-UV

Optimized for your ultra-preparative purifications

Basic configuration

• Components
  •  Control unit
  •  Pump
  •  UV detector
  •  Fraction collector
  •  Solvent tray with drainage system
  •  2 integrated column holder
  •  Accessories box
• .
• Pump
  •  Max. operational flow rate: 125mL/min
  •  Optimum flow rate for columns up to 60mm ID
  •  Max. operational pressure: 400 bar
  •  Quaternary gradient valve
  •  Washing discs
  •  Retention tray with leak detector
• .
• Injection
  •  Injection mode: liquid
  •  « Load & Go » technology: with automatic 10-way valve that  allows the use of  loops for even more  efficient injection
  •  Stainless steel injection loops 2mL and 20µL
• .
• Detection
  •  UV detector 200-400nm or 200-800nm
     (included in the Pack- UVextended)
  •  « DAD » technology
  •  Multi-wavelength and scan collection over band of 200nm
     (or  600nm with the Pack-UVextended)
  •  Spectral visualization and confirmation of purity
  •  Flow cell pathway: 1.0 mm/ 15 µL
• .
• Compatibility and holder compatibility
  •  Normal phase (NP)
     Particle sizes: 3µm, 5µm, 10µm, 15µm, 25µm, 30µm, 50µm
     Reverse phase (RP)
     Particle sizes: 3µm, 5µm, 10µm, 15µm, 25µm, 30µm, 50µm
     Format: all preparative columns up to 60mm ID are compatible
     2 integrated column holders (holder n°1: col. ≥ 20mm ID –  holder n°2: col. 7.8 – 10mm ID)
• .
• Fraction collector
  •  Content:
     – 3 racks
     – 132 test tubes (18 x 150 mm)
  •  Technology:
     – Drainage system for the fraction collector
     – Automatic cleaning of the fraction collector needle (to avoid cross-contamination with the previous purification)
     – RFID: automatic detection of the racks installed in the fraction collector
• .
• Proposed racks

  • Delivery includes 3 racks. Choose from the list below:

     – Rack for tubes:
     13 x 73mm | 13 x 100mm | 16 x 150mm
     18 x 150mm | 18 x 180mm | 21 x 150mm
     25 x 150mm | 28 x 150mm | 29,5 x 200mm
     – Rack for 250 mL Schott bottles

  •  – Rack for funnels (in option)
     Position of the numbered tubes (to facilitate identification of  the tubes)
• .
• Software and control unit
  •  Control via InterSoft^® X software included :
  • – Genius, Artificial Intelligence
  • – « Boost & Go »™ technology
  •  Windows 10
  •  Remote control
  •  Touchscreen 15″
  •  8 USB ports
  •  2 RJ45 ports
  •  Bluetooth/Wi-Fi key
• .
• System optimization
  •  Tubing after pump: 0.5 & 0.75mm internal diameter
  •  Flow cell pathway: 1.0mm / 15µL
• .
• Safety
  •  System light status
  •  Solvent tray with drainage system
  •  Level sensor for solvents and waste
  •  Retention tray with leak detectors in the pump, column holder,  UV detector, valve and fraction collector
  •  « Fume Enclosure » technology (allows the use of the  purification system without a hood)
• .
• Communication
  •  Communication cable Sub-D9 male/female (1m) – unit control  to fraction collector
  •  Communication cable Sub-D9 male/female (0.5m) – unit  control to pump
  •  Communication cable Sub-D9 female/female (1m) – unit  control to UV detector