Configure your puriFlash^® 5.030

Optimized for your Ultra Performance Flash Purification

Basic configuration

•  Components
  • Control unit
  • Pump
  • UV detector
  • Fraction collector
  • Solvent tray with drainage system
  • Integrated column holder
  • Integrated Dry-Load holder (included in the Pack 4-ways electrical valve + kit for PF-5.030)
  • Accessories box
• .
• Pump
  • Max. operational flow rate: 300 mL/min
  • Optimum flow rate for columns up to F0800 format
  • Max.operational pressure: 30 bar
  • Quaternary gradient valve
  • Air purge
• .
• Injection
  • Injection mode: liquid or solid
  • “Load & Go” technology: staggered Dry-Load for even more efficient injections automated via a 4 ports electric valve (included in the Pack 4-ways electrical valve + kit for PF-5.030)
  • RFID technology: automatic detection of Dry-Load (included in the Pack 4-ways electrical valve + kit for PF-5.030)
• .
• Detection
  • UV detector 200-400 nm or 200-800 nm (included in the Pack-UVextended)
  • “DAD” technology
  • Multi-wavelength and scan collection over band of 200 nm (or 600 nm with the Pack-UVextended)
  • Spectral visualization and confirmation of purity
  • Flow cell pathway: 0.1 mm / 40 µL
  • Integrated ELSD detector (included in the Pack-iELSD)
• .
• Column and holder compatibility
  • Normal phase (NP)
    Particle sizes: 10 µm, 15 µm, 25 μm, 30 μm, 40 μm, 50 μm
  • Reverse phase (RP)
    Particle sizes: 15 µm, 30 μm, 50 μm
  • Format: all Flash columns up to F0800 (with optional Integrated column holder for F0800 column) are compatible and can be used at the optimum flow rate , in addition, larger columns can be used with an external column  support  and below the optimum flow rate.
    Dry-Load up to F0330 format are compatible (included in the Pack 4-ways electrical valve + kit for PF-5.030)
    Only 21.2 mm and 30 mm ID preparative columns are compatible
  • Integrated column holder
  • Integrated Dry-Load holder (included in the Pack 4-ways electrical valve + kit for PF-5.030)
  • RFID technology: automatic detection of the columns
• .
• Fraction collector
  • Content:
    – 3 racks
    – 132 test tubes (18 x 150 mm)
  •  Technology:
    – Automatic cleaning of the fraction collector needle (to avoid cross-contamination with the previous purification)
    – RFID: automatic detection of the racks installed in the fraction collector
• .
• Proposed racks
  Delivery includes a choice of 3 racks from the following list:
  • Rack for test tubes:
    13 x 73 mm | 13 x 100 mm | 16 x 150 mm
    18 x 150 mm | 18 x 180 mm | 21 x 150 mm
    25 x 150 mm | 28 x 150 mm | 29,5 x 200 mm
  • Rack for 250 mL Schott bottles
    Position of the numbered tubes (to facilitate identification of tubes)
• .
• Software and control unit
  • Control via InterSoft^® X software included
    – Genius, Artificial Intelligence
    – “Flash & Go”™ technology: compatible with our smartphone app “TLC to Flash & Prep”
    – “Boost & Go”™ technology
  • Windows 10
  • Remote control
  • Touchscreen 15″
  • 8 USB ports
  • 2 RJ45 ports
  • Bluetooth/Wi-Fi key
• .
• System optimization
  • Tubing after pump: 1.6 mm internal diameter
  • Flow cell pathway: 0.1 mm / 40 µL
• .
• Safety
  • System light status
  • Solvent tray with drainage system
  • Level sensor for solvents and waste
  • Retention tray with leak detectors in the pump, UV detector, fraction collector, iELSD (included in the Pack-iELSD) & valve, Dry-Load holder (included in the Pack 4-ways electrical valve + kit for PF-5.030)
  • “Fume Enclosure” technology (allows the use of the purification system without a hood)
• .
• Communication
  • Communication cable Sub-D9 male/female (1m) – unit control to fraction collector
  • Communication cable Sub-D9 male/female (0.5m) – unit control to pump
  • Communication cable Sub-D9 female/female (1m) – unit control to UV detector
  • Communication cable Sub-D9 female/female (1m) – unit control to iELSD (included in the Pack-iELSD)